Fabric Mask Information
Mask has been certified by Uludag University Hospital microbiology laboratory and certified to comply with EN 14683 and ASTM F 2101 standards.
Produced with mask weaving technique, separation efficiency; It is an increased fabric with its fiber structure and composition. Thanks to its high air permeability, it provides a comfortable breathing / exhalation (0.5 mbar pressure increase at 32 L / min test conditions - EN 149), 0.5 micron
Bacterial filtration efficiency test with particles (steptococcus oralis - EN 14683, ASTM F 2101) also performs high separation with 99.9% filtration efficiency.
Due to the high humidity and gas transfer, it provides an additional comfort in breathing by minimizing the accumulation of Co2 and moisture. With its comfort and high filtration efficiency, it has a washing-dry-plug feature, so it can be used for a long time. Any
It is a biocompatible product because it does not contain any chemicals and nanoparticles and it does not have any negative effects on health.
How to Use a Fabric Mask?
Before first use, the mask should be washed at 60 ° C. In subsequent uses, the mask can be washed with this temperature. The mask can be washed a maximum of 20 times.
Washing instruction is 60 C by machine or by hand washing. When washing by hand, please wash the mask in 60 C water for 10 minutes. You can dry it by laying or hanging the mask after rinsing. The mask dries quickly due to its structure. Please do not hand tighten the mask.
The mask is effective for 24 hours. After this time, it should be washed.
Before using the mask, wash your hands with water and soap or hydroalcoholic solution.
Please wear the mask to cover your nose and mouth as shown in the figures below.
Please avoid touching the face of the mask with bare hands. If you do touch it, please wash your hands with soap and water or a hydroalcoholic solution.
To remove the mask, please remove it from the back or remove it by holding the rubber parts, never touch the front of the mask.